Table top in steel, is stainless steel kitchen table an advantage?

Jun 8th

The table top at and around the sink is one of the most important elements in the kitchen. The choice of material is of great importance for usability and appearance, and there will be pros and cons of almost all materials. Even when it comes to steel. Below you get a clear message about what a steel worktop will mean for your kitchen. If you replace the worktop in your kitchen, be aware that it changes the look of the kitchen radically. Many choose a plate of wood as it adds the kitchen room something warm and nice. For the same reason, the grades of stainless steel kitchen table deselected because they imagine that it would seem too industrial.

It is true that steel is use of extensively in the major industrial kitchens. And that in such contexts it is not particularly charming. In addition, marks from greasy fingers are seen very clearly on plain steel surfaces. However, stainless steel kitchen work tables can also be quite elegant. Especially if combined with other materials such as wood in white high gloss. Much depends, of course, on how your kitchen looks. Steel is not necessarily the right choice for an old farmhouse with low ceilings. On the other hand, it may sometimes be worth thinking about contrasts.

READ :  Fireplace Shelves Decoration Living Room

A kitchen table with a steel plate that goes down to the floor can be a superficial counter to an old wooden floor. Although a stainless steel dining tables is quite robust compared to water, it cannot withstand anything. Be sure to place hot pots and the like directly on the table. Most steel table tops are glue with glue that can melt. A very hot piece of kitchenware can cause the steel surface to release the surface and cause severe bumps in the surface. Polished steel does not work well with sharp and hard objects. It is not a good idea to clean the surface with a hard shampoo, as scratches can occur.

The best thing is to use a wet dishcloth, possibly with a little vinegar if there are problems with calcium formation. The durability of the table depends to a large extent on the thickness of the plate steel. The cheapest qualities consist of a very thin plate that is not glue to the substrate. These can easily bumped and scratched by hard treatment. If you want a more durable quality, make sure you choose a sheet thickness of at least 1.25 mm. And it is best if the steel is glue directly to the wooden board. So it is not possible to move (unless exposed to very hot heat).