How to Make Corrugated Plastic Home Depot

Dec 26th

Corrugated plastic home depot – Usually used for short-term advertising, corrugated plastic plates are a cheap marketing tool compared to other types of signboard substrates, such as aluminum. Lightweight but sturdy, corrugated plastic plates are made of polypropylene that gives UV, water and stain resistance. Corrugated plastic signs are used primarily for realty signs, campaign signs, trade shows, and flea market signs. Creation of corrugated plastic characters requires knowledge of vector software and vinyl graphics production.


Determine if corrugated plastic home depot characters will be hanged vertically or horizontally. Buy ready-made corrugated plastic sign items from a wholesale sign delivery store. Clean with a lint-free cloth and isopropyl alcohol before use. Allow air dry. Place a roll of vinyl on the holding rack on vinyl cutter / plotter. Pull the vinyl through the rear of the machine. Use the guides on the machine to erase vinyl. Lock vinyl in place. Select “Cut / Plot” from the File menu. Remove sheets of vinyl from the machine with a cutter when cutting is done cut out letters or logo.

Remove excess vinyl, or “weed” around the letters or logo. Work from the outside, then inside when removing corrugated plastic home depot. Attach all edges to the “cleaned” vinyl sheet to a table with masking tape. Pull out the length required to cover the entire vinyl graphics, plus 4 to 6 inches. Attach pre-mask tape to sheet of vinyl to the table. Keep pre-mask tape properly, but allow a slight drop in the band. Use a rubber scraper to secure before masking tape on vinyl. Use a 45 degree angle when applying the tape. Run the scratch back over the image.

READ :  How to Make Garage Apartment Kits